- 21 -
7. Loading Media
Ribbon Installation
1. Open the Printer’s top
cover.
2.
Pull the Printhead Lever
out and rotate it upward
to the right
(counterclockwise) to
open the Thermal
Printhead.
2
1
3. Place the new ribbon roll
onto the Ribbon Supply
Shaft and place the
empty ribbon core onto
the Ribbon Rewind Shaft.
4. The figure to the right
shows two different
installation methods.
One is for ink-in ribbon
and one for ink-out
ribbon.
5.
Feed the ribbon from the
Ribbon Supply Shaft Rod
under the Printhead. Be
sure that the ribbon is
not fed under the
Moveable Sensor.
Ribbon Installation
(ink-out)
Ribbon Installation
(ink-in)
6. Attach the end of the
ribbon to the empty
ribbon core using
adhesive tape or part of
a label.
7. Rotate the Printhead
Lever clockwise back to
its original position
making sure it snaps into
place.
8. Close the top cover to
complete the ribbon
installation.
