- 1 -
FCC COMPLIANCE STATEMENT
FOR AMERICAN USERS
This equipment has been tested and found to comply with the limits for a CLASS A digital device,
pursuant to FCC 47 CFR Part 15 SUBPART B and ANSI C63.4(2003) IC ICES-003. These limits are
designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference
at his expense.
EMS AND EMI COMPLIANCE STATEMENT
FOR EUROPEAN USERS
This equipment has been tested and passed with the requirements relating to electromagnetic
compatibility. The equipment was also tested and passed in accordance with the European
Standards for both the Radiated and Conducted emissions limits.
Technical Standard:
EMC DIRECTIVE 89/336/EEC (EN 55022 / EN 55024)
Measurement Standards:
EN 55022:1998+A1:2000+A2:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 55024:1998+A1:2001+A2:2003
IEC 61000-4-2:1995+A1:1998+A2:2000 IEC 61000-4-3:2002+A1:2002
IEC 61000-4-4:1995+A1:2000+A2:2001 IEC 61000-4-5:1995+A1:2000
IEC 61000-4-6:1996+A1:2000
IEC 61000-4-11:1994+A1:2000
CAUTION
Danger of explosion if battery is replaced incorrectly.
Only replace battery with an equivalent type as recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Copyright and Trademark Notice
© 2008 by Tharo Systems, Inc.
It is illegal to photocopy or electronically transmit a facsimile of this manual or any portion
of its contents for any means or purpose without the publisher’s permission. Fines of up
to $10,000.00 may be imposed for violation.
All brand or product names are trademarks or registered trademarks of their respective companies.
