YOU NEED …
HERE’S HOW!
1
Push the purple-colored side panels onto the
base panel of the ship from the right and left.
You’ll need to push the tabs sticking out from
the sides of the base panel into the notches in
the side panels.
2
Pushing up from below, slide the wooden panel
with “KOSMOS” written on it onto the front of
the ship (the shorter side). The side panels have
slots in them for this purpose. Next, take the
upper deck panel, which has a small hole in it,
and fit it over the base panel of the ship by
sliding it in from the front.
3
Now complete the front of the ship (the shorter
side) by adding the purple-colored railing,
which you can slide into the corresponding
slots from above. Finally, attach the back
panel across the back of the ship.
3 x plain wood
sheets
2 x wood sheets
with illustrations
1
3
tab
Tip!
If the pieces snag instead of sliding together
smoothly, you can use your sandpaper to
make the slots a little wider or the tabs a
little narrower. Don’t force the pieces together — ask
your parents for help if you need it.
2
6
Research Vessel
and the
