Component
Description
Illustration
Battery case
Item No. 704484
Never directly connect these
terminals to each other. The
batteries and wires can heat
up and explode, not to mention
that the batteries will be
quickly used up.
This power pack supplies the electricity for the
experiments. Before starting the experiments,
you will have to install two 1.5-volt AA batter-
ies (also known as penlight or LR6 batteries)
inside it, as indicated in the battery compart-
ment. You can then obtain electric current
from the box’s two terminals.
Red light
Item No. 706415
Later on, electricity will light up this bulb.
That will show you that electrical current is
flowing.
Green light
Item No. 706417
This is just like the red light, except it’s a differ-
ent color.
Yellow light
Item No. 706416
Again, this is just like the red light, except it’s a
different color.
Motor
Item No. 706414
When electrical current flows through it, the
motor and its yellow propeller will turn quite
quickly.
Two-way switch
Item No. 705055
Quantity: 2
Depending on the setting of the switch, one or
the other of two contact plugs will be electri-
cally connected.
Push button
Item No. 705054
If you push the button, you create an electrical
connection between the terminals. But the
connection is only maintained as long as you
keep pressing it.
COMPONENTS
› › › EQUIPMENT
This list presents brief descriptions
of all the components in the kit,
along with illustrations.
Presenting
the assembly
components!
2
Summary of Contents for Electricity and Magnetism 620417
Page 1: ...TITELSEITE U1 EXPERIMENT MANUAL ...
Page 68: ......