WHAT’S HAPPENING
The bulb lights up as soon as
all the components are se-
curely connected.
The current flows through
the wires that are hidden in-
side the green connectors, as
shown by the white lines.
So you can also use the
green components for your
electrical connections.
Prongs instead of alligator clip
HERE’S HOW
Connect up the components and the green
connectors exactly as you see in the
drawing.
Be sure that the prongs are inserted
securely into the slots.
HERE’S HOW
This time, assemble a circuit using the
wires with plugs at their ends.
You will have to push an X-connector onto
each of the wire’s plugs so that they can
be attached to the light and battery case.
Then push the X-connector slots onto the
light and battery case prongs.
In addition to the wires with alligator clips attached to them, you will also find
some wires in your kit with green cubes at their ends. Try seeing what you can
use them for.
You will find other green connectors in your kit besides the green X-connectors.
Do you think you can use them to assemble a circuit without any wires at all?
Green conductor
EXPERIMENT 4
EXPERIMENT 5
Electricity
WHAT’S HAPPENING
The bulb lights up. So you
can also use this kind of
wire for electrical
connections.
9
Summary of Contents for Electricity and Magnetism 620417
Page 1: ...TITELSEITE U1 EXPERIMENT MANUAL ...
Page 68: ......