![Thames & Kosmos Electricity and Magnetism 620417 Experiment Manual Download Page 29](http://html1.mh-extra.com/html/thames-and-kosmos/electricity-and-magnetism-620417/electricity-and-magnetism-620417_experiment-manual_1099272029.webp)
WHAT’S HAPPENING
Depending on the setting of
the switch, the current will
run through the light or
through the motor.
WHAT’S HAPPENING
By lighting up, the bulb shows
you when current is flowing.
So you can be sure that when
it doesn’t light up, there’s no
circuit. At the moment that
the motor starts up, the bulb
is dimmer than it is after that
point. This shows that the
motor is consuming more
current at that moment.
Only once it’s running at full
speed does its electricity re-
quirement drop again.
Current control
HERE’S HOW
Connect the light and the motor directly
to one of the battery terminals on one
side, and connect the other side of each
component to a different terminal of the
two-way switch.
Now you can choose whether to make the
bulb light up or the motor run.
HERE’S HOW
You can see that the circuit matches the one
in Experiment 21 (“Quick change”), except
in this case a light is attached directly to
one of the battery terminals.
On the other side, you will insert an I-con-
nector to make the components fit together
again.
Try all the switch settings. When does the
bulb light up? Does anything occur to you
as you watch the brightness of the light
when the motor comes on?
How can you check and make sure that a certain switch setting won’t result in a
short-circuit — that is, a direct connection between the two battery terminals?
The simplest way is to monitor the current flow with a light bulb.
You can use the two-way switch to switch the current back and forth between
different loads. Try it with the light and the motor.
Motor or light
EXPERIMENT 19
EXPERIMENT 22
EXPERIMENT 23
Electric Motor
27
Summary of Contents for Electricity and Magnetism 620417
Page 1: ...TITELSEITE U1 EXPERIMENT MANUAL ...
Page 68: ......