Thames & Kosmos DLX, Experiment Manual, Page: 129 / 132

For some of the experiments, you will need boxes and
pallets. Use the patterns on this and the following page to
make them quickly. See page 2 to find out what else you
will need.
Lay wax paper or tracing paper over the pattern and trace
all the lines onto the paper with ruler and pen. (Taping
the paper to the page with a couple strips of masking tape
will keep it from slipping.) Then cut your template out
along the cutting lines.
Next, lay the template onto some colored card stock or
thick construction paper and trace all around its edge
with a pen. Also mark the areas where the dashed lines
are. Cut out the box or pallet and fold it along the dashed
lines. Then apply glue to the shaded surfaces, fold
together, and you’re done!
gluing surface
folding line
cutting line
Box
Template
127