
T1
X1
C12
P16
P16
C6
P13
C4
C11
P13
C7
C2
15
16
17
18
x2
C12
P16
P16
Tube assembly:
There are three 450-mm tubes and one 240-mm tube. Connect them as shown here.
Filling cylinder X1 and tube T1:
Scissor arm
hydraulic cylinder
Claw hydraulic cylinder
Piston
Cylinder
Piston
Cylinder
Nozzle
Nozzle
X3
X3
X4
240 mm
Tube 2
450 mm
T2
Tube 1
450 mm
450 mm
T1
X4
18a. Submerge tube T1 in a basin of water.
18b. Connect
the
long end
of tube T1 to
the nozzle of
cylinder X1
underwater.
T1
18c. Move the piston
in and out repeatedly
to fill cylinder X1 and
tube T1 with as much
water and as little
air as possible.
18d. Remove the
assembly from
the water. Set it
aside. The water
will remain in
the tube.
T1
X1
T1
X1
Lubricate P13!
Lubricate P13!
19
22
A14
23
Filling cylinder X2 and tube T2:
20
Filling cylinder X4:
21
After filling the cylinders and tubes with water, you will have:
X3
X3
T2
T1
X4
X4
T2
X2
T2
X2
T2
19d. Remove the
assembly from the
water. Let the spring
draw the piston back
into the cylinder. Set
it aside. The water
will remain in
the tube.
X1 and T1 are filled with water.
Scissor arm
hydraulic system
Claw hydraulic
system
X4 and T2 are filled
with water.
X2 is mostly
empty.
X3 is empty.
20c. Set X4
aside. The
water will
remain in
the cylinder.
19c. Move the
piston in and out
repeatedly to fill
cylinder X2 and
tube T2 with as
much water and
as little air as
possible.
19b. Connect
tube T2 to
the nozzle of
cylinder X2
underwater.
Make sure C11 is rotated so
its teeth are on the front.
X1
X2
19a. Submerge
tube T2 in the
basin of water.
20a. Submerge
cylinder X4 in
the basin of
water.
20b. Pull the
piston up to fill
the piston with
water.
X2
T2
X4
X4
C11
7
Candy Claw Machine