MENU ACCESS:
!
NOTE
Some or all menus may not be accessible
due to password protection (future).
•
PRESS MENU softkey or NAV ENTER
button to access menus
•
Once in MENUS, use the left/right arrow keys
to scroll to the desired parameter.
•
To Edit/Modify an entry
-- either press ENT
to view the drop down menu. Or use the
numeric keypad to enter the required data.
•
To save changes
, first press SAVE, then use
the arrow up key to get to the top of the menu,
the use the left/right arrows to scroll to the
next menu.
•
To EXIT
-- Press EXIT to return to HOME
Channel.
LCD and Keypad Backlight/Screen Saver
The user may turn on the backlighting for the
display, keypad, and channel numbers (around the
16-position Select knob), by pressing any key,
button, or turning any knob. These lights will remain
on for a pre-determined time period before they turn
off automatically.
!
NOTE
Screen Options that are grayed out – are
not available this version of software.
6
SELECT Menu
!
NOTE
The Channel List and Talk Groups on
this screen are currently grayed out and
cannot be modified in this version of
software. To change channels, use the
Channel Knob located on top of the
radio.
•
Select Banks (collection of zones)
•
Select Zones (collection of channels/TG’s)
•
Turn Talk-Around ON or OFF (
FUTURE)
VIEW CHANNEL Menu
VIEW access only
•
View Channel parameters
7
PROGRAM CHANNEL Menu
PROGRAM CHANNEL – P25
•
The Channel name is displayed.
•
Select the waveform TYPE
P25
•
Enter the RX/TX Freq
•
Enter the RX/TX NAC
•
Enter the RX/TX TG
•
Turn ENCRYPT ON or OFF
•
Adjust the LO/HI Power Setting
PROGRAM CHANNEL – AN
•
The Channel name is displayed.
•
Select the waveform TYPE
AN
•
Enter the RXSQMOD (CSQ, CTCSS, CDCSS)
•
Enter the TXSQMOD (OFF, CTCSS, CDCSS)
•
Enter the RXSGLVL (0-16, 0 is open squelch)
•
Enter the TXSQLVL
•
Enter the RX/TX Freq ranges
•
Adjust the LO/HI Power Setting
8
Transmitting/Receiving (cont.):
Receiving
Conventional Channels Talkgroups
•
Verify PTT is NOT depressed
•
Audio will come from speaker (or speaker/mic)
LED Receive indications
•
OFF – not transmitting or receiving
•
GREEN
– receiving signal
P25 Unit to Unit Call
To place a call within your unit,
1.
Press the PRIV Softkey from the HOME
screen.
2.
Enter the Unit ID number.
3.
Press enter, then press PTT to initial the call.
The Unit ID will be active until a different
channel is selected, or the user presses EXIT.
SCAN – Conventional and Priority
Enable
SCAN
– two (2) options:
1.
Press the MENU Key and navigate to the scan
menu and select SCAN and set to ON. Scanning
will start immediately when ON is selected. Once
the SCAN function is set to ON, exit the SCAN
Menu Screen.
OR
2.
Press one of the side buttons that has been pre-
programmed to SCAN.
Enable
PRI SCAN
– two (2) options:
1.
Press the MENU Key and navigate to the scan
menu and select SCAN, select PRI SCAN, and set
to ON. Scanning will start immediately when
ON is selected. Exit the SCAN Menu Screen.
OR
2.
Press one of the side buttons that has been pre-
programmed to PRI SCAN.
5