OPERATING INSTRUCTIONS
Doc No. 84382 Rev 2
THALES COMMUNICATIONS, INC. PROPRIETARY INFORMATION
3-9
Modifying Menu Selections – SELECT Menu or PROGRAM Menu
!
NOTE
Unless otherwise noted, the following “hints” apply to each
menu:
•
If an entry is grayed out – it cannot be changed by the
user.
•
If a drop down menu appears after ENT is pressed, the
user may select from this drop-down menu.
•
If no drop down screen appears, the user may use the
numeric keypad to enter the required information, such as
frequency range, RX/TX NAC, RX/TX TG using the
numeric keypad.
1)
Press the MENU Softkey or press ENT from the HOME screen to enter the menus.
2)
Using the left / right arrow keys scroll to the applicable menu.
3)
To edit an entry in that menu, press either the up (
) or down (
) arrows to scroll to desired line
item. The user may either select from drop-down menus or enter data directly using the numeric
keypad.
4)
After the changes have been completed, hit the SAVE softkey.
5)
To move to the next menu, press the up arrow until you reach the top of the menu, then use the
left (
◄
) and right (
►
) arrows to move to the next menu.
!
NOTE
If you click EXIT after you have save your changes, you
will be returned to the HOME Screen.
Changing ZONES
The first three (3) zones can be selected by the 3-position switch (FIXED at Zone Select for Initial
Release) (Refer to Figure 3-1). Additional zones can be accessed by going to SELECT Menu (as
described in Chapter 2).
