©Copyright Task Force Tips LLC 2017-2018
LIY-210 September 17, 2018 Rev01
6
3.0 GENERAL INFORMATION
The EF1 RC monitor is extremely compact, yet it has a large 1-½ inch waterway, capable of fl owing up to 200 gpm, making it the
ideal forestry bumper turret. Waterway with turning vane has only 15 psi (1.3 bar) friction loss at 200 gpm (760 l/min). Elevation range
is 90° above horizontal to 45° below. Horizontal travel is 270° (135° either side of a center position). Field changeable horizontal
travel stops are factory set to give 180° (90° either side of a center position). Designed for 12 VDC or 24 VDC operation, selection
is automatic. The motor control circuits use position encoders and current limiting to protect the drive train at the ends of travel. Unit
has waterproof factory installed plug on power wire for easy removal or reinstallation. Electric drives and control box are waterproof.
Main waterway made from hardcoat anodized ANSI 356-T6 aluminum. Silver powder coat fi nish. Various inlets are available.
3.1 PART IDENTIFICATION
REMOVE CAP TO ACCESS
MANUAL OVERRIDE HEX NUT
FOR ELEVATION
MODEL & SERIAL
NUMBER ON LABEL
OUTLET
TURNING VANE
INLET FLANGE
HORIZONTAL ROTATION
TRAVEL STOP
SEE SECTION 4.2
ELEVATION
GREASE FITTING
ELECTRONICS
ENCLOSURE
HORIZONTAL
GREASE FITTING
Y1165
®
SERIAL# www
.tft.com-Y
123456
219-462-6161 • www
.tft.com • MADE IN USA
#
MODEL#
Y1165
®
SERIAL# www
.tft.com-Y
123456
219-462-6161 • www
.tft.com • MADE IN USA
#
MODEL#
QUICK CONNTECT INLET
ELECTRONICS
ENCLOSURE
MODEL & SERIAL
NUMBER ON LABEL
REMOVE CAP TO ACCESS
MANUAL OVERRIDE HEX NUT
FOR ELEVATION
TURNING VANE
ELEVATION
GREASE FITTING
HORIZONTAL
GREASE FITTING
OUTLET
Fig. 3.1
EF1 RC Monitor Part Identifi cation
