31
2.
Within 3 minutes of activating the Temperature Station, place the batteries into the
outdoor transmitter (see “
How to install and replace batteries in the outdoor
transmitter
” below).
3.
After a few seconds of inserting the batteries into the transmitter, the Temperature
Station will start receiving data from the transmitter(s). The remote temperature will
then be displayed on the Temperature Station. If this does happen after 15 minutes,
the batteries will need to be removed from both units and reset from step 1.
4.
The Temperature Station can take up to 3 remote transmitters. If you have purchased
additional transmitter, follow step 2 for extra transmitters. However, ensure that you
leave 10 seconds in between the reception of the last transmitter and the set-up of the
following transmitter. The Temperature Station will number the transmitters in the
order of set-up, i.e. the first transmitter will have the temperature displayed with the
number 1 against it and so on.
5.
When all the transmitters are set up, there is a testing period, during which the display
switches quickly between all the received transmitters at random, according to which
random transmission it receives. Pressing any key will stop this process. The process
also stops automatically if no keys are pressed for a few minutes.
