32
6.
Once the remote temperature has been received and is displayed on the Temperature
Station, the DCF-77 time code reception is automatically started. This takes typically
between 3-5 minutes in good conditions. This time period is an excellent opportunity
to locate the transmitter(s) in suitable location(s) outdoors. In order to ensure the
sufficient 433 MHz transmission however, this should under good conditions be no
more than 25 meters from where the Temperature Station will finally be positioned.
7.
If after 10 minutes the DCF time has not been received, use the SET/ CH key to
manually enter a time initially. The clock will automatically attempt to receive the DCF
time at each full hour. When this is successful, the received time will override the
manually set time. The data is also updated with the received time (Please refer also
to “
DCF-77 Radio controlled time
” and “
Manual time setting
”)
