15
14
Radio-controlled clock with indoor climate
Radio-controlled clock with indoor climate
As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or
local regulations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-of-life devices to a
designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible dis-
posal.
11. Specifications
Power consumption
4 x AA 1,5 V batteries (not included)
Measuring range - temperature -10 °C… 50 °C /14 °F…122 °F
Resolution
0,1 °C ( 0,1 °F)
Measuring range - humidity
20 %...99 %
Resolution
1 %
Indication LL / HH
Measurement is outside the measuring range
Housing dimension
212 x 27 (71) x 241 mm
Weight
483 g (device only)
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time of going to print and may
change without prior notice.
The latest technical data and information about your product can be found by entering the product number on our homepage.
EU Declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 60.4515 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of con-
formity is available at the following Internet address:
www.tfa-dostmann.de
E-Mail: [email protected]
TFA Dostmann GmbH & Co. KG, Zum Ottersberg 12, D-97877 Wertheim, Germany
12/16
• The alarm will be interrupted for 4 minutes.
• Press any button and the alarm will stop.
• The alarm symbol remains on the display.
8. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if the device will not be used for an extended period of time.
• Keep the device in a dry place.
8.1 Battery replacement
• Change the batteries when the display becomes weak.
• Open the battery compartment and insert four new AA 1,5 V batteries.
• Make sure the polarity is correct.
• Close the battery compartment again.
9. Troubleshooting
Problem
Solution
No display on the device
➜
Ensure the batteries' polarity are correct
➜
Change the batteries
No DCF reception
➜
Activate (ON) the DCF reception in the setting mode
➜
Press the
▼
/ SEC
button and start the reception manually
➜
Wait for an attempt reception during the night
➜
Choose another place for your product
➜
Set the clock manually
➜
Check if there is any source of interference
➜
Restart the instrument according to the manual
Wrong alarm time
➜
When setting the alarm time, make sure that ‘PM’ appears on the display between 12:00 - 00:00 o'clock!
Incorrect indication
➜
Change the batteries
➜
Use a pin to press the
RESET
button
If your device fails to work despite these measures contact the retailer where you purchased the product.
10. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in ordinary household waste.
TFA_No. 60.4515_Anleitung 22.12.2016 17:18 Uhr Seite 8
