WIRELESS 433 MHz WEATHER STATION
Instructions Manual
INTRODUCTION:
Congratulations on purchasing this Weather Station with wireless 433 MHz
transmission of outdoor temperature and display of indoor temperature and
humidity, weather forecast icons and weather tendency indicators. It is further
featuring a DCF-77 radio controlled clock with calendar display and two alarms.
With eight easy to use function keys, this innovative product is ideal for use in the
home or office.
FEATURES:
The Weather Station
•
DCF-77 Radio controlled time with manual setting option
•
24 hour display
•
Hour and minute display, seconds indicated by flashing dot
•
Time zone option ±9 hours
•
Features 2 alarms with snooze function
•
Weekday with date or date with month calendar display
•
Weather forecasting with 3 weather icons
•
Weather tendency indicator
•
Indoor temperature reading in °C with minimum and maximum recording
•
Indoor humidity reading displayed as RH% with minimum and maximum
recording
•
Indoor comfort level indicator - happy or sad face icons
•
Outdoor temperature reading (for up to 3 transmitters) in °C with minimum
and maximum recording
•
All minimum and maximum recordings show date and time of temperature
received and can be reset
•
Can take up to three outdoor transmitters
•
Low Battery indicator
•
Wall mountable or table standing
THE OUTDOOR TRANSMITTER
•
Remote transmission of outdoor temperature to
Weather Station by 433 MHz
•
Shower proof casing
•
Wall mounting case
•
Mounting at a sheltered place. Avoid direct rain
and sunshine
SETTING UP:
1.
First, insert the batteries into the Weather station (see “
How to install and
replace batteries in the Weather Station
” below). Once the batteries are in
place, all segments of the LCD will light up briefly and a short signal tone will
sound. Then the indoor temperature and humidity, the time as 0:00, the date
as 1.1. and the weather icons sun and clouds will be displayed. If the indoor
temperature and humidity are not displayed after a few seconds, remove the
batteries and wait for at least 10 seconds before reinserting them. Once the
indoor data is displayed proceed to step 2.
2.
Within 3 minutes of activating the Weather station, place the batteries into the
transmitter (see “
How to install and replace batteries in the Temperature
Transmitter” below).
The temperature will then be displayed on the small
LCD of the transmitter. If the temperature is not displayed, remove the
batteries and wait for at least 10 seconds before reinserting them.
3.
After a few seconds of inserting the batteries into the transmitter, the Weather
Station will start receiving data from the transmitter. The remote temperature
will then be displayed on the Weather Station. If this does not happen after 15
minutes, the batteries will need to be removed from both units and reset from
step1.
4.
The Weather Station can take up to 3 remote transmitters. If you have
purchased additional transmitters, follow step 2 for all extra transmitters.
LCD display
Hanging hole
Battery cover
Function keys
Detachable stand
