Comfort Indicator Icon
is faulty because it is not raining. It simply means that the air pressure has dropped
and the weather is expected to get worse but not necessarily rain.
Note:
After setting up, readings for weather forecasts should be disregarded for the next
12-24 hours. This will allow sufficient time for the Weather Station to collect air
pressure data at a constant altitude and therefore result in an more accurate
forecast.
Common to weather forecasting, absolute accuracy cannot be guaranteed. The
weather forecasting feature is estimated to have an accuracy level of about 75%
due to the varying areas the Weather Station has been designed for use in. In
areas that experience sudden changes in weather (for example from sunny to rain),
the Weather Station will be more accurate compared to use in areas where the
weather is stagnant most of the time (for example mostly sunny).
If the Weather Station is moved to another location significantly higher or lower than
its initial standing point (for example from the ground floor to the first floor of a
house), remove the batteries and re-insert them after about 30 seconds. By doing
this, the Weather Station will not mistake the new location as being a possible
change in air-pressure when really it is due to the slight change of altitude. Again,
disregard weather forecasts for the next 12 to 24 hours as this will allow time for
operation at a constant altitude.
THE WEATHER TENDENCY INDICATOR
Working together with the weather icons are the weather tendency indicators
(located on the right hand side of the weather icons). When the indicator points
upwards, it means that the air-pressure is increasing and the weather is expected
to improve, but when indicator points downwards, the air-pressure is dropping and
the weather is expected to become worse.
Taking this into account, one can see how the weather has changed and is
expected to change. For example, if the indicator is pointing downwards together
with cloud and sun icons, then the last noticeable change in the weather was when
it was sunny (the sun icon only). Therefore, the next change in the weather will be
cloud with rain icons since the indicator is pointing downwards.
Note:
Once the weather tendency indicator has registered a change in air pressure, it will
remain permanently visualized on the LCD.
LCD 4 INDOOR TEMPERATURE AND HUMIDITY READING WITH
COMFORT LEVEL INDICATOR:
The indoor temperature and humidity are received automatically and displayed on
the fourth section of the LCD.
THE COMFORT LEVEL INDICATORS:
Comfortable
:
A happy face icon “
J
” indicating a temperature level between
20.0°C and 25.9°C and humidity between 45% and 65%.
Uncomfortable
:
A sad face icon “
L
” indicating any value outside the
comfortable range.
TOGGLING AND RESETTING THE INDOOR RECORDINGS:
1.
To toggle between the indoor current, minimum and maximum temperature
and humidity data and the time of temperature at which they were recorded,
press the IN key:
Once to show the minimum temperature and humidity values with time of
temperature and date recorded
Twice to show the maximum temperature and humidity values with time of
temperature and date recorded
Three times to return to the current time, date, temperature and humidity
levels
2.
To reset the minimum and maximum temperature and humidity data and the
times at which they were recorded, press the IN key continuously for about 3
seconds. This will reset all minimum and maximum data recorded to the
current time, date, temperature and humidity. The min/max temperatures and
humidity recorded are of current time and they remain unaffected by the time
zone setting.
Indoor Temperature
in °C
Indoor Relative
Humidity %
