manualshive.com logo in svg

Textron Tempo 525N-30, Operating Manual

Share
Download
Textron Tempo 525N-30 Operating Manual Download Page 29

23

Mask –

Use the UP/DOWN arrow keys to highlight 
(

) the Standard to be selected.

Press enter to select.
The L

INK

P

ARAMETERS

screen will be displayed.

From the L

INK

P

ARAMETERS

screen, input the fol-

lowing :

Use the softkeys to enter the unit of measure-
ment -

M

- Meters

FT

- Feet

Then input the following fiber attributes -

Length –

Use the LEFT/RIGHT keys to highlight

the digit to be set.
Use the UP/DOWN keys to change the numbers.
Press the Enter button to select, and move to the
next line.

No. of Connectors –

Use the LEFT/RIGHT keys

to highlight the digit to be set.
Use the UP/DOWN keys to change the numbers.
Press the Enter button to select, and move to the
next line.

No. of Splices – 

Use the LEFT/RIGHT keys to

highlight the digit to be set.
Use the UP/DOWN keys to change the numbers.
Press the Enter button to select.
When complete, press the NEXT softkey to return
to the Setup screen.
Note: The Seup screen will display the Loss
Thresholds for Pass/Fail results per the criteria
set.
Press the EXIT softkey to return to the Autotest
screen.

Continued . .

.

SETUP SCREENS 

Continued. . .

Edit Threshold?

continued. . .

Section 3: Screen Functions & Descriptions

Summary of Contents for Tempo 525N-30

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands