23
Figure 25 - Attaching the Lift Link
6.
Pull out the hooks in the front side of the
mower, as shown in Figure 26, and install the
front links to the mower.
Figure 26 - Installing the Front Links
7.
Install the front links to the front bracket with
the lock pin by pulling up the lever, Figure 27.
Figure 27 - Installing the Front Links
8.
While pushing the collar forward, Figure 28,
install the joint to the P.1. 0. shaft of tractor,
Figure 29. When the P.1.0. shaft is inserted
fully, the collar will be returned automatically
by spring pressure. Make sure that the joint is
fitted securely to the P.1. 0. shaft.
Figure 28 - Pushing the Collar Forward
Figure 29 - Installing the Joint to the P.T.O. shaft
IMPORTANT: When installing the universal joint,
the front and rear yokes must be kept in the phase
plane, as shown in Figure 21. A blind Spline is
provided to assist in proper alignment of P. 1. 0.
joints. Whenever removing the mower, do not leave
any part of the drive line on the tractor.
PREPARING MOWER FOR OPERATION
Summary of Contents for Ransomes TMM48R
Page 2: ......
Page 18: ...16 PREPARING MOWER FOR OPERATION MOWER TERMINOLOGY...
Page 29: ......
Page 30: ...Ransomes Way Ipswich England IP3 9QG RANSOMES...
