Textron Kubota V2403-CR-TE4, Safety, Operation And Maintenance Manual

Page: 89 / 116

en-89
QUALITY OF CUT 10
NOTE: The Arrow indicates direction of travel.
“Step cutting” occurs when the grass is cut higher
on one side. The cause is mechanical wear or
incorrect setting of the roller or deck caster.
Possible Cause Correction
The HOC (height-of-cut) settings are different on the side of one
cutter deck or the cutter decks are set at different heights. Check HOC adjustment of cutting units. (Refer to Parts and
Maintenance Manual.)
Worn roller bearings or deck caster wheels. Check and replace the roller bearings, deck caster wheels.
cutter deck movement is decreased. Check and remove the cutting unit movement limit.
Changes in turf density Change the direction of cut.
The Machine ride height is not equal from side to side. Check and adjust the tyre pressure. (Refer to Parts and
Maintenance Manual.)
cutter deck height is not equal from side to side. Check and adjust the mower weight distribution.
TN0221
10.2 THE STEP CUT ________________________________________________________