en-57
ADJUSTMENTS 7
7.4
GENERAL INSTRUCTIONS FOR GRAMMER SEATS _______________________
•
The operating instructions should be read in full before use.
•
The operating instructions should be kept in the vehicle and always be at hand.
•
The driver seat may only be fitted, serviced and repaired by specialist personnel, in accordance with
national regulations and the vehicle manufacturer's fitting instructions. In the event of incorrect
assembly and/or repair, all warranty and liability claims shall be null and void. The national fitting
regulations can be obtained from GRAMMER or from agencies of the company (see dealer directory),
or from the vehicle manufacturer.
•
A correctly functioning and individually adjusted driver seat is essential to your health. Take adequate
care of your seat and have it serviced regularly to ensure that it functions cor- rectly.
The functional checks should be carried out at least as regularly as vehicle services (see maintenance plan for
vehicle).
Safety instructions
•
When making connections to the vehicle electrical system, pay attention to the information on the rating
plate (on the rear spring; push seat right forward to read). The seat connection must be separately
fused:
-at 12V 11A (19A at seat heater)
-at 24V 9A (13A at seat heater)
•
To prevent damage to the driver's back, the seat must be adjusted for the driver's weight before use and
before every change of driver.
•
Before commissioning of the driver's seat, possible packaging material has to be removed from the seat
cushion and the backrest upholstery.
•
To prevent injury, no objects should be placed within the moving area of the driver seat.
•
To eliminate any risk of accident, the settings must be checked to ensure they are correctly engaged
before the vehicle is driven.
•
Adjustments must not be made while driving.
•
When the backrest upholstery has been removed, the backrest frame must be sup-ported, for example
held in place, before the backrest adjuster is operated. If you fail to do so, there is a danger that the
backrest frame may jerk forward and cause injury.
•
If you make any changes to the standard seat (for example fitting parts which are not original
GRAMMER parts) it may no longer meet the safety standards to which it is tested.Functions may be
impaired, threatening your safety. For this reason, any change in design of the seat must be approved
by GRAMMER.
•
Seatbelts can be retrofitted to the driver seat. Seatbelts may only be fitted on the approval of the vehicle
manufacturer, as they increase the load in the seat mounting area. Seatbelts must be fitted in
accordance with specific national regulations and guidelines, and must be approved by GRAMMER.
•
Seatbelts must be fastened before driving. The seatbelts must be replaced after an accident.Where
seatbelts are fitted to the driver seat, the seat and seat mounting must be checked additionally by
specialist personnel after an accident has occurred.
•
Fasteners must be checked regularly for tightness. If the seat wobbles there may be loose bolts or other
faults. If the seat does not function correctly (for example the seat suspension), contact a specialist
workshop immediately to arrange for repairs to be carried out. If you fail to do so, your health may be
affected and the risk of accident increased.
•
Seats with a built-in switch (to deactivate component units when leaving the seat or the vehicle) may
only be installed with the prior approval of the vehicle manufacturer, and may only be operated together
with additional safety devices in the vehicle.
•
Before driving the vehicle, the function of any switches fitted in the seat must be checked. If
malfunctions are detected the vehicle must not be driven.
INCREASED RISK OF ACCIDENT
•
Loads must not be placed on seats with a built-in switch, except for the driver's weight during normal
use, as the vehicle may otherwise start to move by itself.
INCREASED RISK OF ACCIDENT
•
GRAMMER can provide no guarantee for damage resulting from incorrect assembly, use or repair of
the driver seats.
Summary of Contents for Kubota V2403-CR-TE4
