WE.3213
Version
1.a
6/97
Auf
dem
Knapp
46
Tel.:
++49
(0)2191/907-0
D-42855
Remscheid
Fax:
++49
(0)2191/907-141
________________________________________________________________________________________________________________
Instruction Manual
Crimping Tool K 15
1. General
Remarks
Before starting to use the tool please read the instruction manual carefully.
2. Technical
Data
-
Weight:
0,500 kg
- Length:
ca. 210 mm
- Crimping Range: 0,5 to 6 mm
2
(Oval-Crimp) for insulated cable terminations
3. Operation
- This mechanical tool is equipped with a crimping force adjust screw (Pos. 1). Prior to
adjust the screw the counter nut at the end of the non moveable handle must be
loosened. Turning the slotted-head screw clockwise increases the crimping force,
turning it counter clockwise decreases the crimping force. Afterwards the counter nut
must be locked again.
- This tool serves to terminate insulated connectors of 3 crimping ranges: red 0,5-1
mm², blue 1,5-2,5 mm², yellow 4-6 mm².
- Crimping of barrel and insulation is made in 1 cycles.
- The tool incorporates a stripping device for wires ranging from 0,5 to 6 mm².
- This tool can cut copper and aluminium strands.
- Pull release lever (Pos. 2) after completing the crimp.
Attention
Do not use on live electrical circuits.
Before starting to crimp please make sure that all parts involved in the crimping process
are not energised.
4. Maintenance
The crimping tool has to be cleaned thoroughly and the bolt joints have to be oiled
regularly.
Pos. 1
Pos. 2
