background image

H4905A Hydraulic Sign Post Puller

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

2

Description

The H4905A is a portable, hydraulically powered device 

intended to pull various sizes and shapes of standard 

sign posts. Capable of developing 43.6 kN (9800 lb) of 

lifting force, the sign post puller uses either serrated 

jaws or a chain to grip the post. It features a built-in 

control valve.

Safety

Safety is essential in the use and maintenance of 

Greenlee Utility tools and equipment. This instruction 

manual and any markings on the tool provide informa-

tion for avoiding hazards and unsafe practices related to 

the use of this tool. Observe all of the safety information 

 provided.

Purpose of this Manual

This manual is intended to familiarize personnel with 

 

the safe operation and maintenance procedures for the 

following Greenlee Utility tool:
 

H4905A (42237) Sign Post Puller

Keep this manual available to all personnel.

Replacement manuals are available upon request at no 

charge at www.greenlee.com.

Other Publications

Tool Owners/Users

SAE Standard J1273 (Hose and Hose Assemblies):

 

Publication 99930323

Authorized Greenlee Utility Service Centers

Service Manual:  Publication 99916045

All specifications are nominal and may change as design 

improvements occur. Greenlee Textron Inc. shall not be liable for 

damages resulting from misapplication or misuse of its products.

KEEP THIS MANUAL

Table of Contents

Description .................................................................... 2

Safety

 ............................................................................ 2

Purpose of this Manual

 ................................................. 2

Other Publications

 ......................................................... 2

Important Safety Information

 .....................................3–5

Identification

 .................................................................. 6

Specifications

 ................................................................ 7

Hoses and Fittings ........................................................

8

Hose Connections .........................................................

8

Typical Setup

 .................................................................

8

Operation ..................................................................9–10

Maintenance 

 ............................................................... 10

Troubleshooting ........................................................... 11

Illustration and Parts List

 ........................................12–13

Summary of Contents for Greenlee H4905A















Reviews: