background image

6036 Triple Sheave

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

4

IMPORTANT SAFETY INFORMATION

Improper setup or operation may cause damage to equipment or personal injury.  

Follow setup instructions carefully.
Failure to observe this warning could result in severe injury or death.

Adjust top sheave to 

the lowest position 

above ground level.

Brace manhole 

sheave frame 

solidly against 

inside of manhole.

Securely anchor the 

hook on the lower 

sheave to the bottom 

of the mahhole.

Sheave

Brace bottom on manhole sheave frame solidly 

• 

against inside of manhole.

Adjust top sheave to the lowest position above 

• 

ground level.

Securely anchor the hook on the lower sheave to 

• 

the bottom of the manhole.

Make sure the sheaves are positioned to avoid 

• 

pulling the rope across sharp edges.

Inspect thoroughly before each use for missing or 

• 

damaged components.

Inspect for loose fasteners and make sure all 

• 

working parts are in good working order. Lubricate 

if necessary.

Do not climb on manhole sheave.

• 

Do not remain inside manhole during pull.

• 

Summary of Contents for GREENLEE 6036













Reviews: