Customer Care
6.
Place pos. meter probe A on one
resistor tab and neg. meter probe B
on the remaining tab. Verify 0.2 – 0.5
ohms. If resistance is out of spec.
replace resistor. If resistance is good,
go to step 7.
A
B
5.
Disconnect resistor control module
black wire from B- on the controller. If
error status changes, replace the
resistor module. If error continues, see
step 6.
7.
Try a known good controller if error
is gone
,
warranty controller. Error
remains
,
reinstall controller and
contact Customer Care.
Resistor control wire
12 818 DC Bus High – Hardware Detected
Continued
Resistor Control Module
Page 1
6
