Textron ALTERRA MUD PRO 700 LTD EPS 2018, Operator'S Manual

Page: 56 / 76

54
Front Differential and Rear
Drive Gear Lubricant
(Inspecting/Changing)
Inspect and change the gear lubricant in
each according to the Maintenance
Schedule. When changing the lubricant,
use approved SAE 80W-90 hypoid oil
and use the following procedure.
1. Place the ATV on level ground.
2. Remove each oil filler plug.
3. Drain the oil into a drain pan by
removing in turn the drain plug from
each.
CF107B
CF106C
4. After all the oil has been drained,
install the drain plugs and tighten to
45 in-lb.
5. Pour recommended oil into each
filler hole.
CF113A

NOTE: The manufacturer recom-
mends the use of genuine lubri-
cants.
6. Install the filler plugs.
Hydraulic Hand Brake
Brake Fluid
Check the brake fluid level in the brake
fluid reservoir. If the level in the reser-
voir is not visible in the sight glass, add
DOT 4 brake fluid.
CF295A

NOTE: If the sight glass appears
dark, there is a sufficient amount of
fluid in the reservoir.
Brake Lever Lock

NOTE: The brake lever lock must
lock the wheels. If it doesn’t, take the
ATV to an authorized dealer for ser-
vice.
CAUTION
Inspect the oil for any signs of metal
filings or water. If found, take the ATV
to an authorized dealer for servicing.
! WARNING
Be sure to inspect the hydraulic brake
system before each use. Always
maintain brakes according to the
Maintenance Schedule.
CAUTION
Be careful not to spill any fluid when
filling the brake fluid reservoir. Wipe
away spilled fluid immediately.