background image

! WARNING

Indicates a hazardous situation which, if not 
avoided, could result in death or serious injury. 

11

! WARNING

POTENTIAL HAZARD

Going down a hill improperly.

WHAT CAN HAPPEN

Could cause loss of control or cause the ATV to over-
turn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for going down hills
as described in this Operator’s Manual.
Always check the terrain carefully before you start down any hill.
Shift your weight backward.
Never go down a hill at high speed.
Avoid going down a hill at an angle that would cause the ATV to lean sharply to
one side. Go straight down the hill where possible.

! WARNING

POTENTIAL HAZARD

Operating this ATV after or while consuming alcohol or drugs.

WHAT CAN HAPPEN

Could seriously affect your judgment.
Could cause you to react more slowly.
Could affect your balance and perception.
Could result in an accident.

HOW TO AVOID THE HAZARD

Never consume alcohol or drugs before or while driving this ATV.

! WARNING

POTENTIAL HAZARD

Operating this ATV at excessive speeds.

WHAT CAN HAPPEN

Increases your chances of losing control of the ATV, which can result in an acci-
dent.

HOW TO AVOID THE HAZARD

Always ride at a speed that is proper for the terrain, visibility and operating condi-
tions, and your experience.

Summary of Contents for ALTERRA 500 2018









































































Reviews: