Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
FL-B101Q-DCA _ FL-B01Q-DCV (d0084)
Page 1
• Standard Input Rnage
– DCA
ID02 : DC mV ±20mV, ±50mV, ±100mV, ±200mV
w/24V Exc.
– DCV
ID01 : DC-Volts
2V
/20V/200V
w/24V Exc.
ID05 : DC-Volts
2V
/20V/200V
w/24V Exc. and Zero offset
adjustable pot
• Two 9 Amp Form C, and two 4 Amp Form A relays available
• Optional isolated 16 bit analog output. User or factory
scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any
desired span from ± one bar to the full scale range
• Provision to connect an external programming lockout
switch.
• Optional NEMA-4 front cover.
• 24 V DC excitation is available to power external 4/20 mA
transmitters and 5 or 10 V DC excitation is available for
resistance bridge type sensors.
• Four programmable setpoints.
• Relays activation can be selected to occur above (HI) or
below (LO) each setpoint.
• UL Listed
Input Specs: ..............
Single-ended, however isolated power supply
enables differential measurements up to a
maximum common mode of 50V.
A/D Converter: ..........14 bit single slope
Accuracy: ..................±(0.05% of r 1segment)
Temp. Coeff.: .............100 ppm/°C (Typical)
Warm up time: ...........2 minutes
Conversion Rate: ......10 conversions per second (Typical)
Bargraph Display: .....101 segment 4” vertical (std),
horizontal (optn), red (std), green (optn),
Positive Overrange: ..Bargraph display flashes
Negative Overrange:
First segment of bargraph display flashes
Relay Output: ............Two 4 Amp Form A relays and Two
9 Amp Form C relays
Analog Output: .........Isolated 16 bit user scalable mA or V
OIC (mA out) ...........4-20 mA @ 0 to 500Ω max loop resistance
OIV (volts out) .......... 0-10 V DC @ 500 Ω or higher resistance
Power Supply: ...........AC/DC Auto sensing wide range supply
PS1 (std) ................85-265 VAC, 50-400 Hz / 95-300 VDC @ 4.2W
PS2 .........................15-48 VAC,50-400 Hz / 10-72 VDC @ 4.2W
Operating Temp.: ......0 to 50°C
Storage Temp: ...........–20°C to 70°C
Relative Humidity: ....95% (non condensing)
Case Dimensions: ....3/32 DIN, Bezel: 36x144 mm(1.42”x5.69”)
Depth behind bezel: (4.64") 117.5 mm
Plus 10 mm (0.39”) for Right-angled con
-
nector, or plus 18.3 mm (0.72”) for Straight-
thru connector, or plus 26.5 mm (1.05”) for
Push-On connector.
Weight: .......................9.5 oz., 12 oz when packed
General Features
Specifications
Index
LEOPARD FAMILY
Analog Output Scaling and Calibration . . . . . . . . . . . 9
Case Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Component Layout . . . . . . . . . . . . . . . . . . . . . . . . .
11
Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . 2
Custom Face Plates and Scale. . . . . . . . . . . . . . . . 14
Glossary of Programming Symbols and Modes of
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Input Module Component Glossary. . . . . . . . . . . . . . .
13
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
One Point Quickset Rescaling and Calibration
Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . 15
Opening the Case to Access Mode Select Headers . . .4
Overview of Display Modes, Scaling Capabilities and
Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Pin Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setpoint Adjust. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting the Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Standard Display Mode Calibration Procedure. . . . . 6
Two Point Quickset Scaling and Calibration . . . . . . . 5
DC Volts or DC Amps Meter Controller and
Transmitter.
Excelent replacement for Horizontal and
Vertical Switchboard Meters.
FL-B101Q-DCA
20/50/100/200mV DC Full Scale
FL-B101Q-DCV
2/20/200V DC Meter
101 Segments in a 9/64 DIN Case
