Note:
1) The main output waveform (Sine and Triangle wave) quality will
be affected when TTL/CMOS is activated. So when a high
quality Sine or Triangle wave is required, please turn off this
function.
2) When you choose square wave, the TTL/CMOS function will
always be activated.
Example of the Setting of the TTL Output
(1)
To set the instrument:
•
Frequency:
5kHz
•
Signal type: TTL output
(2)
Proceed the following steps:
•
Set the main frequency to 5kHz (refer to the Setup of
Frequency).
•
Press SHIFT + 9 (TTL) keys to set TTL/CMOS
output mode. The TTL LED
⑪
is on now.
•
A 10kHz/TTL Level signal will be obtained from the
connector
⑭
.
Note:
1) Now the TTL/CMOS knob
⑰
is in the push back status.
2) The functions are toggled between TTL and CMOS by
repeating the TTL/CMOS knob operation.
15