32
5. STORE/RECALL
The DL-2052 can store and recall measurement history (for up to 1000 counts) as well as the instrument
settings.
5-1. Store Measurement Record
Background
The DL-2052 can store the measurement history which can be recalled later for
observation and analysis as in Maximum, Minimum, and Average value.
Note: Previously recorded measurements will be erased every time the store function
is used or if power is reset.
Data count
1 ~ 9999
Not applicable to
Store/recall measurement history is not applicable to Diode/Continuity test
.
Store step
1. Press the Shift key followed by the DCI (Store)
key. The store menu appears.
2.
Move the cursor using the Left/Right key. Change
the data count using the Up/Down key.
3.
Press the Enter key to confirm editing and to go
back to the previous display.
STO
Indicates the measurement history is stored
5-2. Recall Measurement Record
Background
The DL-2052 can recall the stored measurement history for observation and analysis
as in Maximum, Minimum, and Average value.
Not applicable to
Store/recall measurement history is not applicable to Diode/Continuity test
.
Recall stored
record
Press the Shift key, then the ACI (Recall) key. The stored
measurement record appears.
1st display
Shows the stored measurement result
2nd display
Shows the reading count
RCL
Indicates the data has been recalled
View each reading Change the reading count using the Up/Down key.
View Max/Min/
Average
Switch to the Average/Maximum/ Minimum value of the
recorded data using the Right key. Use the left key to go
back.
