![Texim Europe Sol Chip Comm Wireless Solar Tag System Kit Installation And Operating Manual Download Page 3](http://html1.mh-extra.com/html/texim-europe/sol-chip-comm-wireless-solar-tag-system-kit/sol-chip-comm-wireless-solar-tag-system-kit_installation-and-operating-manual_1097489003.webp)
157 Jaffa Street, "Amot Building" Haifa Israel ,35251 Fax + (972) 4 6228513 . Tel + (972) 4 8216942
Kit Content Detailed Description
Item
no.
Item name
Qty.
Description
Picture
1
Sol Chip Comm™
Wireless Solar Tag –
SCC
2
The SCC is an all-weather, solar
powered device that connects to
the sensor, provides the sensor
with power and wirelessly
connects it to the wireless
gateway. The sunlight energy is
harvested during day light time
and stored in an internal energy
storage.
Solar
panels
Sensor
connector
Antenna
connector
All weather
resistant box
2
Soil Moisture Sensor
1
The soil moisture is measured by
injecting the 3 spokes into the
ground. The sensor is controlled
via the cable (which connects to
one of the SCCs)
Plugged into the ground
Sensor cable
Connector
3
Air Temperature and
Humidity Sensor
1
The dual purpose sensor is
controlled through the cable
(which connects to the 2
nd
SCC)
Dual Purpose (Air
Temperature and
Humidity) Sensor
Sensor cable
Connector
4
433MHz Antenna
3
Magnet Base Antenna. Used for
the 433MHz radio
communication between the
SCC’s and the Wireless
Gateways
5
Sol Chip Comm™
Wireless Gateway
1
The Wireless Gateway collects
the data from the sensors via the
SCC and uploads to Sol Chip
website via cellular
communication. The device is
AC powered and can be placed
up to 1,500m (approx. 1 mile)
from the SCC (in line of sight
Power
connector
433MHz
antenna
Cellular
antenna
Attention: Carefully unpack the Demo kit. When unpacking, care should be taken to prevent dropping