Texi XYZ 2517, User Manual

Page: 18 / 47

14
3. Installation
3.1. Opening and inspecting packing crates
A Remove all screws on the upper side of the packing crate.
B
Remove the cover and place it to one side.
C Remove the screws from the upper crossbars D Remove the crossbars and place them to one side
E
Loosen the screws of the side cover.
F Remove the side cover.
G
Make sure the contents are complete and without damage.
3.2. Initial leveling of the base frame
A Lift each side support end to keep the balance by precision spirit level.
B
Determine the lowest position of the foot and use the setscrews to adjust it upwards.
C
Use the setscrew to raise the position of the lowest foot.
Note:
Prevent the crate cover from warping when placed
at an angle. Place the packing crate level.
Note:
• Only complete the installation if all parts are present and undamaged.
•
Inform customer service if any parts are missing or damaged.
• Replenish or replace missing or damaged parts.