TEXI SMART S+B
9
8. PRINCIPLES OF SAFE AND EFFICIENT WORK
1. Use only normal tap water.
2. Never add additives to water.
3. Connect Texi Smart S+B to a suitable and protected socket.
4. Keep out of reach of children, both when it is on and off.
5. Do not iron garments directly on persons or things.
6. Never leave the iron on the board or on garments when it is on.
7. Never leave garments on the board when it is on, in order to avoid them from
getting spoilt or burnt.
8.
ATTENTION:
Texi Smart S+B may be switched on only when the ironing board
is open.
9.
ATTENTION:
put away Texi Smart S+B as shown (fig. 4). Never put it away
upside down (fig. 5).
9. WORKING WITH MANUAL AND AUTOMATIC MODE
1. When you choose the manual mode, the vacuum / blowing motor works conti
nuously, unless it’s
switched off. To switch on or switch off the motor, use the key
. To
change the motor
function from vacuum to blowing or opposite use the key
.
Note: While you first run your machine, the vacuum / blowing motor is off.
2. When you choose the automatic mode, the vacuum/blowing motor works upon pressing the
micro-switch of the iron. The way of working is showed on the below exemplary picture:
Example
: The delay of the vacuum / blowing motor on, after pressing iron’s micro-switch, is set on 2
sec. The delay of the motor off, after releasing the iron’s micro-switch, is set on 6 sec.
Press the micro-switch of the iron and start ironing. After 2 seconds the vacuum / blowing motor will
start working. 6 seconds after releasing the micro-switch, the motor will stop working. By extended
time of the motor work, moisture is sucked out of the material and the effect of ironing is fixed.
Note: After pressing the micro-switch the steam will come out of the iron, after releasing
– it will stop.
Fig. 4
Fig. 5
Summary of Contents for Smart S+B
Page 1: ...Texi Smart S B Instruction manual...
Page 15: ...TEXI SMART S B 15...
Page 16: ...TEXI SMART S B 16 Distributor...
