INS483
6
The user can individually program a number of configurable
settings as illustrated in the programming chart. Factory settings
are shown as shaded boxes.
Changes to the existing settings can easily be made. To reset
the factory settings simply remove power form the detector,
press and hold the program button
(fig. 10)
whilst temporarily
applying power to the detector: either before installation, with a
PP3 battery, or by applying 12 Volts to the unit on site.
4.
Programming
10
1
2
3
1
RANGE METERS
10
20
30
2
PULSE COUNT
1
2
3
LED
OFF
ON
SETTING
OPTIONS
To change any of the Prestige Orbit settings: -
1) Press the program button as shown in fig. 10 for the number of the Option to be changed i.e. once
for range, twice for pulse count, three times for LED.
2) Wait four seconds until the blue LED indicator goes off.
3) The indicator will then flash out the existing setting.
4) To change the setting for that option, immediately (within 2 seconds) press the button the number of
times required for the new setting.
5) The indicator blinks twice and the changes are stored.
Any alterations made to the Prestige Orbit settings are stored in the detector’s non volatile memory.
EXAMPLE
To change the LED Setting from OFF to ON.
1) Press the program button three times and release the button.
2) Wait until the indicator goes off.
3) The indicator will now flash once.
4) Press the program button twice and release the button.
5) The indicator flashes twice showing that the option has been stored and the detector returns to
normal operation.
Program
Button
LED
PROGRAMMING CHART
