1
INS483
• A CCTV event trigger utilising two independent passive infrared detectors combined in a T05 package
and a microwave sensor. Both sensors have to trigger before the detector signals an alarm. This high
precision, very reliable presence detector has been designed for use within CCTV installations.
Programmable parameters include a pulse count feature and a choice of detection ranges from 10 to
30 metres.
• The integral dual axis tilt sensor allows 180˚ of pan and 90˚ tilt. This increases the speed of the
outdoor installation and provides incredibly accurate aiming of the detection pattern. The electronics
module is acrylic coated for additional component stability. It is encased in an ABS housing with a
UV stabilised translucent front cover ensuring the sensor is impervious to and unaffected by weather
conditions. Additionally the combination of precision electronics, digital white light filter and double
shielding eliminates false alarms from the sun and other visible light sources.
• The Prestige Orbit design gives a neat and professional appearance with no visible indication of the
orientation of the detector head, and totally hides the wiring.
Introduction
Quick Installation Guide
Apply supply voltage to the unit, the blue LED flashes 3 times.
The detector takes approximately 2-3 minutes to settle.
The walk test LED is factory set to OFF. Pressing the program button once will enable the walk test LED
for 5 minutes.
THE FRONT COVER MUST BE FITTED WHEN WALK TESTING.
FACTORY SETTINGS ARE:-
1 RANGE 30 METRES
2 PULSE COUNT 1
3 LED OFF
When enabled the
Prestige Orbit DT
has three LED indicators.
Green - Microwave detection
Red - Both PIRs detection
Blue - Alarm output, both PIRs and microwave detection
