The snow blower can be operated either with a two-wheel drive (delivery condition) or a single-wheel
drive to make it easier to control the plow.
Proceed as follows to change from a two-wheel to a single-wheel drive:
Ensure that the engine is switched off.
Replace the safety split pin from the left wheel (Fig.31).
Now insert the safety split pin into the outer hole in the axle (Fig.32) so that the wheel can turn
freely on the axle.
Repeat the procedure to get back to the two-wheel drive version, follow the above instructions
in reverse order.
Important!
Check that the skids (Fig.22/ Item 10) are correctly adjusted. The skids should be adjusted
so that the auger unit is just above ground level.
Summary of Contents for SNOWBUSTER 650E
Page 8: ...SPECIFIKATIONER OG FUNKTIONER ...
Page 34: ...FEATURES AND SPECIFICATIONS ...
