RamSan-500 User’s Manual
31 of 48
Figure 20 - Web Monitor Access Policy Table
To create and access policy, click the “
Add
” button. This opens a
window that allows you to define the parameters of the access policy,
shown in
Figure 21
.
Figure 21 - Web Monitor Add Access Policy
To create an access policy, present the Logical unit to a host, then
select a “
Controller Port
” on the RamSan. Next, select a “
World
Wide Port Name (WWPN)
” from the drop down box, this box will
include any hosts HBA WWPN that are presented to the RamSan port,
as well as an “
Open Access
”. If a particular HBA WWPN is selected
then the LUN will only be presented to that HBA (it will be masked to
it). If “
Open Access
” is selected then the LUN will be presented to all
HBAs that are connected to that port. Lastly, click the “
Next
” button
to create the access policy.
