Texas Instruments Xilinx UG230 User Manual Download Page 28

Page: 28 / 33

Spartan-3E FPGA Starter Kit Board User Guide

www.xilinx.com

161

UG230 (v1.2) January 20, 2011

Appendix B

Example User Constraints File (UCF)

#####################################################

### SPARTAN-3E STARTER KIT BOARD CONSTRAINTS FILE

#####################################################

# ==== Analog-to-Digital Converter (ADC) ====

# some connections shared with SPI Flash, DAC, ADC, and AMP

NET "AD_CONV" LOC = "P11" | IOSTANDARD = LVCMOS33 | SLEW = SLOW | DRIVE = 6 ;

# ==== Programmable Gain Amplifier (AMP) ====

# some connections shared with SPI Flash, DAC, ADC, and AMP

NET "AMP_CS" LOC = "N7" | IOSTANDARD = LVCMOS33 | SLEW = SLOW | DRIVE = 6 ;

NET "AMP_DOUT" LOC = "E18" | IOSTANDARD = LVCMOS33 ;

NET "AMP_SHDN" LOC = "P7" | IOSTANDARD = LVCMOS33 | SLEW = SLOW | DRIVE = 6 ;

# ==== Pushbuttons (BTN) ====

NET "BTN_EAST" LOC = "H13" | IOSTANDARD = LVTTL | PULLDOWN ;

NET "BTN_NORTH" LOC = "V4" | IOSTANDARD = LVTTL | PULLDOWN ;

NET "BTN_SOUTH" LOC = "K17" | IOSTANDARD = LVTTL | PULLDOWN ;

NET "BTN_WEST" LOC = "D18" | IOSTANDARD = LVTTL | PULLDOWN ;

# ==== Clock inputs (CLK) ====

NET "CLK_50MHZ" LOC = "C9" | IOSTANDARD = LVCMOS33 ;

# Define clock period for 50 MHz oscillator (40%/60% duty-cycle)

NET "CLK_50MHZ" PERIOD = 20.0ns HIGH 40%;

NET "CLK_AUX" LOC = "B8" | IOSTANDARD = LVCMOS33 ;

NET "CLK_SMA" LOC = "A10" | IOSTANDARD = LVCMOS33 ;

# ==== Digital-to-Analog Converter (DAC) ====

# some connections shared with SPI Flash, DAC, ADC, and AMP

NET "DAC_CLR" LOC = "P8" | IOSTANDARD = LVCMOS33 | SLEW = SLOW | DRIVE = 8 ;

NET "DAC_CS" LOC = "N8" | IOSTANDARD = LVCMOS33 | SLEW = SLOW | DRIVE = 8 ;

# ==== 1-Wire Secure EEPROM (DS)

NET "DS_WIRE" LOC = "U4" | IOSTANDARD = LVTTL | SLEW = SLOW | DRIVE = 8 ;

# ==== Ethernet PHY (E) ====

NET "E_COL" LOC = "U6" | IOSTANDARD = LVCMOS33 ;

NET "E_CRS" LOC = "U13" | IOSTANDARD = LVCMOS33 ;

NET "E_MDC" LOC = "P9" | IOSTANDARD = LVCMOS33 | SLEW = SLOW | DRIVE = 8 ;

Summary of Contents for Xilinx UG230


































Search results

Summary of Contents for Xilinx UG230

Reviews:

Related manuals for Xilinx UG230

Brands by name

Popular brands

Texas Instruments Xilinx UG230, User Manual

Search results

Summary of Contents for Xilinx UG230

Reviews:

Related manuals for Xilinx UG230

Brands by name

Popular brands