Operation
5.2.3
Adjusting the Settings
The TSC4270 behavior can be adjusted by changing the values of the the runtime configuration grid and
the tunable flash parameters grid and writing it to the TSC4270.
5.2.3.1
Runtime Configuration Grid
Use the runtime configuration grid to adjust the TSC4270 dynamic settings that do not require to change
the state of the TSC4270. Permitted operations include changing the report rate and turning the filters on
or off. This operation does not require service or ISP keys. After changing the values, the TSC4270 must
be updated with the current settings from the grid by clicking button ii shown in
. Also, button i
retrieves the current settings present in the TSC4270 and populates the settings on the runtime
configuration grid. The settings of this grid can be reverted to default valuess by using the Reset button on
the GUI, or by pressing the reset switch on the TSC4270EVM device.
Figure 15. Runtime Configuration Grid, Expanded View
15
SBAU208 – April 2013
TSC4270 Evaluation Module
Copyright © 2013, Texas Instruments Incorporated
