Operation
5.2.5
Node Report Tab
The second tab is the Node Report tab, as shown in
. Select this tab to retrieve the current run-
time configuration from the TSC and to change back the bit selection on the run-time parameters to
request the TSC to generate node reports. The Node Report tab requires a finger or an object on the
panel to generate node reports, unless the Cont_Read Enable register from the runtime configuration grid
is turned on.
Figure 18. Node Reports from the TSC When a Finger is Present on Panel
18
TSC4270 Evaluation Module
SBAU208 – April 2013
Copyright © 2013, Texas Instruments Incorporated
