2 EVM Setup and Quick Start Guide
lists the default configuration.
Table 2-1. Default EVM Configuration
Parameter
Specification
Input Power Supply
4 V to 14 V
Operating Temperature
25°C
Switching Frequency
500 kHz
The TPS7H5001/2/3/4EVM-CVAL can be quickly turned on and run using the connections shown in
.
Table 2-2. TPS7H5001/2/3/4EVM-CVAL Connections
Terminal or Test Point
Voltage Source
J11 (VIN)
4 to 14-V input at 10 mA. See Positive and Negative Terminal for J11 for
connections.
TP9 (COMP)
1 V at < 10 mA (input range can be –0.3 V to 3.3 V based on the
TPS7H5001-SP Radiation-Hardness-Assured Si and GaN Dual Output
Controller
)
Positive and Negative Terminal for J11
shows which terminal is the positive and negative on J11. Connect the
positive input voltage to the positive terminal and GND to negative terminal.
Figure 2-1. Positive and Negative Terminal for J11
EVM Setup and Quick Start Guide
4
TPS7H500x-SP Evaluation Module User's Guide
SLVUCD0 – FEBRUARY 2022
Copyright © 2022 Texas Instruments Incorporated
