1 Introduction
This board enables the TPS7H5001/2/3/4EVM-CVAL to be connected to other components needed to quickly
prototype and evaluate a complete power converter design. The TPS7H5001EVM-CVAL is placed on an open
test board similar to the board used in the
TPS7H5001-SP Lookahead Total Ionizing Dose (TID)
Adding test points and voltage terminals is the only major change to the design that was needed to facilitate
probing the TPS7H5001/2/3/4EVM-CVAL without additional hardware. Minor changes were made to the BOM for
manufacturability purposes.
1.1 Features
This EVM has the following features:
• Synchronous rectification outputs with adjustable dead time
• 0.613-V ±1% Voltage reference overtemperature, radiation, and line and load
• Adjustable slope compensation and soft start
• Configurable duty cycle limit
1.2 Applications
• Space satellite isolated power supplies
• Radiation hardened applications
• Space satellite payloads
Introduction
SLVUCD0 – FEBRUARY 2022
TPS7H500x-SP Evaluation Module User's Guide
3
Copyright © 2022 Texas Instruments Incorporated
