Software Operation
10
SLVUAZ0 – November 2016
Copyright © 2016, Texas Instruments Incorporated
Evaluation Module for the TPS65235-1 LNB Voltage Regulator With I
2
C
Interface for DiSEqC2.x Application
By clicking on the
B
button, the
Basic information about TPS65235-1
page comes up which lists the
features and application information for TPS65235-1. Follow the steps to do the basic check for the EVM.
The GUI will guide the beginner to setup the EVM and GUI.
6.1
Register Map Page
By clicking the
E
button, the Register Map interface comes out. See
Figure 8. Register Map Page for GUI
Single click on a register name to show
FIELD VIEW
. This shows the detail setting of each bit.
Double click on the bit to change the bit to 0 or 1.
Single click the
?
for the register name to show the detail description page for the register.
For
Write Registers
option, when the
Immediate
option is selected, any change is sent to the EVM
immediately; otherwise,
Write Registers
button for each register must be clicked to send the control signal.
Register values can be read back from the EVM by clicking
Read Register
for each register or
Load All
Registers
or set the
Auto Read
option.
The Status for USB Adapter Connection, only shows the status for the adapter, not the EVM board. The
user can select the Write Registers on Register Map page to check whether the board communication is
ok or not.
