Texas Instruments TPS650937, User Manual, Page: 5 / 20

www.ti.com
Introduction
Table 1. Default Jumper Settings for the TPS659037EVM (continued)
Reference Jumper Setting Function Default
1 GPIO_0
2 GPIO_1
3 GPIO_2
4 GPIO_3
5 GPIO_4
6 GPIO_5
Jumper b/w 8 and 11 to tie
J27
POWERHOLD pin to VRTC
7 GPIO_6
8 GPIO_7
9 REGEN1
10 RESET_OUT
11 LODRTC
12 GND
1 VSYS
J28 2 PWRON Open
3 GND
1 VSYS
J29 2 PWRON Open
3 GND
J30 - Reserved Closed
1 VIO_IN
2 SMSP7
3 VIO_IN
4 SMSP9
5 VIO_IN
6 NC
J31 Jumper b/w 9 and 10
7 VIO_IN
8 LDO3
9 VIO_IN
10 +1V8
11 VIO_IN
12 +3V3
Open All LDO_INs are floating
J34 Closed
All LDO_INs are connected to
Closed
VSYS
Open VPROG/TESTV is floating
J35 Open
VPROG/TESTV is connected to
Closed
GND
J36 — SMPS12/3 Open
J37 — SMPS12/3 Open
J38 — SMPS12/3 Open
J39 — SMPS3 Open
J40 — SMPS45 Open
J41 — SMPS45 Open
J42 — SMPS6 Open
J43 — SMPS7 Open
J44 — SMPS8 Open
J45 — SMPS9 Open
Open VCC1 isn't shorted to VSYS
J47 Closed
Closed VCC1 is shorted to VSYS
Open POWERGOOD is floating
J48 Closed
Closed POWERGOOD is pulled up to 3.3V
5 SLIU016 – November 2015 TPS659037 EVM User’s Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated