Texas Instruments TPS650937, User Manual, Page: 4 / 20

Introduction
www.ti.com
1.4 Default Jumper Settings
Table 1 lists the options for each header and the default jumper settings for the TPS659037EVM.
Table 1. Default Jumper Settings for the TPS659037EVM
Reference Jumper Setting Function Default
I2C1_SCL and I2C1_SDA are
Closed
shorted
J3 Open
I2C1_SCL and I2C1_SDA are
Open
separated
I2C2_SCL and I2C2_SDA are
Closed
shorted
J5 Open
I2C2_SCL and I2C2_SDA are
Open
separated
PWRDOWN pin is controlled by
Closed
MSP430
J7 Closed
Open PWRDOWN pin is floating
NRESWARM pin is controlled by
Closed
MSP430
J8 Closed
Open NRESWARM is floating
ENABLE1 pin is controlled by
Closed
MSP430
J9 Closed
Open ENABLE1 is floating
NSLEEP pin is controlled by
Closed
MSP430
J10 Closed
Open NSLEEP is floating
RESET_IN pin is controlled by
Closed
MSP430
J11 Closed
Open RESET_IN is floating
Closed INT pin is connected to MSP430
J12 Open
Open INT pin is floating
SYNCDCDC pin is connected to
Closed
GND
J13 Open
Open SYNCDCDC pin is floating
1 GPADC_IN0
2 GPADC_IN1
J22 Open
3 GPADC_IN2
4 GPADC_VREF
Open POWERGOOD pin is floating
J23 Open
POWERGOOD pin is connected to
Closed
GND
Open CLK32KGO pin is floating
J24 Open
CLK32KGO pin is connected to
Closed
GND
Jumper b/w 1 and 2 BOOT0 is tied to LDORTC
J25 Jumper b/w 2 and 3
Jumper b/w 2 and 3 BOOT0 is tied to GND
Jumper b/w 1 and 2 BOOT1 is tied to LDORTC
J26 Jumper b/w 2 and 3
Jumper b/w 2 and 3 BOOT1 is tied to GND
4 TPS659037 EVM User’s Guide SLIU016 – November 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated