Texas Instruments TPS650937, User Manual, Page: 13 / 20

www.ti.com
TPS659037EVM Graphical User Interface (GUI)
5.1.2 Registers
I
2
C communication with the device uses the Registers tab of the GUI. There are five groups of registers.
Clicking the + symbol next to the group lists all the registers in that group. A second column next to the
register name shows the address offset of that register.
To read data from the register, select the appropriate register and click Read . The register data appears in
the left column, and the hexadecimal value of the register appears in the Read Data field. To write data to
the register, check the appropriate boxes in the right column and click Write , or enter the hex value in the
Write Data field and click Write . The bits of the register are labeled on the left, with bit 0 in the top box and
bit 7 in the bottom.
Figure 6. Registers
13 SLIU016 – November 2015 TPS659037 EVM User’s Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated