Texas Instruments TPS650937, User Manual, Page: 12 / 20

TPS659037EVM Graphical User Interface (GUI)
www.ti.com
5 TPS659037EVM Graphical User Interface (GUI)
The GUI for TPS659037EVM gives the user the ability to interact with the internal registers of the device
while also allowing control of some input pins. The GUI can be downloaded here. The TPS659037EVM
GUI installation requires the LabVIEW run-time engine, which can be downloaded from the National
Instruments website.
5.1 GUI Tabs
The TPS659037EVM GUI has two tabs. The first tab is labeled Registers, and the second tab is labeled
DUT_Control .
5.1.1 DUT_Control
The digital input signals to the PMIC are controlled through the DUT_Control tab of the GUI. There are six
pins controlled by the GUI. To send a logic low to any of the pins, uncheck the corresponding box and
click
Write Static . To send a logic high to any of the pins, check the corresponding box and click Write
Static .
Figure 5. DUT_Control
12 TPS659037 EVM User’s Guide SLIU016 – November 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated