background image

 

      

SPRS293A − OCTOBER  2005 − REVISED NOVEMBER 2005

39

POST OFFICE BOX 1443 

 HOUSTON, TEXAS 77251−1443

documentation support 

Extensive documentation supports all TMS320

 DSP family generations of devices from product

announcement through applications development. The types of documentation available include: data sheets,
such as this document, with design specifications; complete user’s reference guides for all devices and tools;
technical briefs; development-support tools; on-line help; and hardware and software applications. The
following is a brief, descriptive list of support documentation specific to the C6000

 DSP devices:

The TMS320C6000 CPU and Instruction Set Reference Guide (literature number SPRU189) describes the
C6000

 DSP core (CPU) architecture, instruction set, pipeline, and associated interrupts.

The TMS320C6000 DSP Peripherals Overview Reference Guide [hereafter referred to as the C6000 PRG
Overview] (literature number SPRU190) provides an overview and briefly describes the functionality of the
peripherals available on the C6000

 DSP platform of devices. This document also includes a table listing the

peripherals available on the C6000 devices along with literature numbers and hyperlinks to the associated
peripheral documents. These C6712D peripherals, except the PLL, are similar to the peripherals on the
TMS320C6712 and TMS320C64x devices; therefore, see the TMS320C6712 (C6711 or C67x) peripheral
information, and in some cases, where indicated, see the TMS320C6712 (C6712 or TMS320C67x

 or C671x

or C67x) peripheral information, and in some cases, where indicated, see the C64x information in the
TMS320C6000 DSP Peripherals Overview Reference Guide (literature number SPRU190).

The TMS320C6000 Technical Brief (literature number SPRU197) gives an introduction to the C62x

/C67x

DSP devices, associated development tools, and third-party support.

TMS320C6000 DSP Software-Programmable Phase-Locked Loop (PLL) Controller Reference Guide
(literature number SPRU233) describes the functionality of the PLL peripheral available on the C6712C/12D
device.

The  Migrating from TMS320C6211(B)/6711(B) to TMS320C6711C application report (literature number
SPRA837) describes the differences and issues of interest related to migration from the Texas Instruments
TMS320C6211, TMS320C6211B, TMS320C6711, and TMS320C6711B devices, GFN packages, to the
TMS320C6711C device, GDP package.

The  Migrating from TMS320C6712 to TMS320C6712C application report (literature number SPRA852)
describes the differences and issues of interest related to migration from the Texas Instruments TMS320C6712
device, GFN package, to the TMS320C6712C device, GDP package.

The  TMS320C6712, TMS320C6712C, TMS320C6712D Digital Signal Processors Silicon Errata  (C6712
Silicon Revisions 1.0, 1.2, 1.3,
  C6712C Silicon Revision 1.1, and C6712D Silicon Revision 2.0) [literature
number SPRZ182C or later] categorizes and describes the known exceptions to the functional specifications
and usage notes for the TMS320C6712, TMS320C6712C, TMS320C6712D DSP devices.

The TMS320C6711D, C6712D, C6713B Power Consumption Summary application report (literature number
SPRA889A or later) discusses the power consumption for user applications with the TMS320C6713B,
TMS320C6712D, and TMS320C6711D DSP devices.

The tools support documentation is electronically available within the Code Composer Studio

 Integrated

Development Environment (IDE). For a complete listing of C6000

 DSP latest documentation, visit the Texas

Instruments web site on the Worldwide Web at http://www.ti.com uniform resource locator (URL).

See the Worldwide Web URL for the application report How To Begin Development with the TMS320C6712 DSP
(literature number SPRA693), which describes in more detail the compatibility and similarities/differences
between the C6711 and C6712 devices.

Summary of Contents for TMS320C6712D







































































































Reviews: