Getting Started
www.ti.com
•
After several moments, the ADS1293 ECG Demo START button and the
Bluetooth
symbol appear as
shown in
Figure 18
.
NOTE:
If the
Bluetooth
symbol does not appear, close the application and repeat the steps listed in
Section 4.3
. If the problem continues, see
Section 5
below.
Figure 18. Enable Bluetooth on iOS Device
•
The three channel readings are now available on the screen. If the board and ECG simulator are
properly connected, the screen will appear similar to
Figure 19
or
Figure 20
.
–
Figure 19
appears when connected to SKX2000 ECG Simulator.
Figure 19. ECG Data Connected to the Simulator
–
Figure 20
appears when connected to the body.
Figure 20. ECG Data Connected to the Body
16
Wireless Heart Rate Monitor Reference Design
TIDU195A – January 2014 – Revised July 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated
