Texas Instruments OMAP36 Series, Technical Reference Manual

Page: 663 / 3738

Public Version
www.ti.com
PRCM Register Manual
Bits Field Name Description Type Reset
9 ERRORGENERATORENABLE Error generator module enable RW 0x0
0x0: Disable error generator module
0x1: Enable error generator module
8 MINMAXAVGENABLE Min/Max/Avg detector module enable RW 0x0
0x0: Disable min max avg detector module
0x1: Enable min max avg detector module
7:2 RESERVED Reserved RW 0x00
1 SENNENABLE Enable/disable SenN sensor RW 0x1
0x0: Disable SenN sensor
0x1: Enable SenN sensor
0 SENPENABLE Enable/disable SenP sensor RW 0x0
0x0: Disable SenP sensor
0x1: Enable SenP sensor
Table 3-540. Register Call Summary for Register SRCONFIG
PRCM Functional Description
• SmartReflex Voltage Control : [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]
PRCM Basic Programming Model
• SmartReflex Module Initialization Basic Programming Model : [11] [12] [13] [14] [15] [16] [17] [18]
• Changing OPP Using the SmartReflex Module : [19] [20] [21]
• Changing OPP Using Only the Voltage Processor Module : [22]
PRCM Use Cases and Tips
• Device SmartReflex Initialization : [23] [24] [25] [26] [27] [28] [29] [30]
• Switch VDD1 OPPs : [31] [32] [33] [34] [35] [36]
• Switch VDD2 OPPs : [37] [38] [39] [40] [41] [42]
PRCM Register Manual
• SR Register Summary : [43]
Table 3-541. SRSTATUS
Address Offset 0x0000 0004
Physical Address 0x480C 9004 Instance SR1
0x480C B004 SR2
Description This register contains status bits that indicate that the values in the register are valid or events have
occured
Type R
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESERVED
AVGERRVALID
MINMAXAVGVALID
MINMAXAVGACCUMVALID
ERRORGENERATORVALID
663 SWPU177N – December 2009 – Revised November 2010 Power, Reset, and Clock Management
Copyright © 2009–2010, Texas Instruments Incorporated