sys_boot[5:0]
System control
module
hw_dbg[17:0]
scm-003
Public Version
SCM Integration
www.ti.com
13.2.1 Functional Interfaces
13.2.1.1 Basic SCM Pins
shows the SCM functional interface configured to observe device module debug signals.
Figure 13-3. SCM Interface Signals
13.2.1.2 SCM Interface Description
lists the SCM input and output configured to observe device module debug signals.
Table 13-1. SCM I/O Description
Signal Name
I/O
(1)
Description
Reset Value
hw_dbg[17:0]
O
Debug signals 0 to 17
N/A
sys_boot[5:0]
I
Boot configuration mode bits 0 to 5
per boot mode selection
(1)
I = Input, O = Output
13.3 SCM Integration
This section describes the integration of the SCM within the device.
shows the SCM integration in the device .
2438
System Control Module
SWPU177N – December 2009 – Revised November 2010
Copyright © 2009–2010, Texas Instruments Incorporated